loader image

CLEAN SEAL REGULARTM

A Premium, medium particle size, acid soluble, Loss Circulation Material.

usage

seepage-loss-with-icon
moderate-loss-with-icon
severer-loss-with-icon

FLUID TYPE

Oil Based

Water Based

GENERAL INFORMATION

Clean Seal Regular™ is a premium broad particle size distribution seepage loss/lost circulation product. The Clean Seal product line of drilling fluid additives has been developed as our Acid Soluble solution for the reduction of seepage loss, control of fluid loss, as well as well-bore stability and strengthening. Clean Seal Regular has been engineered to aid in the remediation of seepage loss to moderate/severe loss of circulation in your payzone and other formations where clean out is essential. Clean Seal Regular is greater than 97% acid soluble in either organic or mineral acids for ease of removal during the well completion stage.

GENERAL INFORMATION

Ven-Set 950™ is designed to consolidate, stabilize and assist in compacting soils. Compaction and soil stabilization are important in many areas but is essential in preparing the base soil in roadbeds. Ven-Set 950™ is a proprietary product formulated around highly reactive, inorganic and organic polymers containing dispersants, surface active agents and other synergists. Ven-Set 950™ gels, crosslinks, polymerizes and hardens in the presence of many of the materials commonly found in soil. The proprietary compounds in Ven-Set 950™ are designed to react with many of the inorganic and organic components in soil such as limestone, iron ores, caliche, clays, gumbos, sandstone, cement, etc. Ven-Set 950™ is a completely environmentally safe product. It is non-toxic, non-corrosive, non-flammable and non-allergenic. Ven-Set 950™ is easy to use. The water-soluble concentrate is diluted on site with the proper amount of water and applied with a conventional water truck. Ven-Set 950™ is recommended for any area of soil stabilization where it is desirable to reduce permeability to water, improve load-bearing capacity, and to reduce soil plasticity. Embankments, levees, ponds, and temporary load bearing areas are other potential areas requiring soil stabilization. Although the Ven-Set 950™ binding process involves a relatively complex set of chemical steps and reactions, it is simple to apply under field conditions. Ven-Set 950™ is a highly effective dust and wind erosion control agent. The binding agents in Ven-Set 950™ form strong, cohesive films between dust particles. These binding capabilities bind and agglomerate potential dust particles into larger size particles that are less susceptible to dust formation.

GENERAL INFORMATION

Clean Seal™ has been engineered to aid in the remediation of partial to severe loss of circulation in your pay zone and other formations where clean out is essential. Clean Seal™ is greater than 97% acid soluble in either organic or mineral acids for ease of removal during the well completion stage.

Our Clean Seal™ products are a blend of Acid Soluble particles and plugging agents specifically engineered to bridge and seal permeable formations. Clean Seal™ products are effective for use in water, oil, or synthetic based drilling fluid systems. Clean Seal™ products do not affect the rheological properties of drilling fluid systems.

Clean Seal™ products are effective at both preventing loss circulation from occurring and in treating loss circulation after it has occurred. Clean Seal™ products can be used in combination with other lost circulation materials to control partial to severe losses and to increase wellbore stability.

Clean Seal™ does not require any special mixing equipment and can be added to the mud through the hopper.