The Clean Seal™ product line of drilling fluid additives has been developed as our Acid Soluble solution for the reduction of seepage loss, control of fluid loss, as well as well-bore stability and strengthening. Clean Seal™Has been engineered to aid in the remediation of partial to severe loss of circulation in your payzone and other formations where clean out is essential. Clean Seal™ is greater than 97% acid soluble in either organic or mineral acids for ease of removal during to well completion stage.
Our Clean Seal™ products are a blend of Acid Soluble particles and plugging agents specifically engineered to bridge and seal permeable formations. Clean Seal™ products are effective for use in water, oil, or synthetic based drilling fluid systems. Clean Seal™ products do not affect the rheological properties of drilling fluid systems.
Clean Seal™ products are effective at both preventing loss circulation from occuring and in treating loss circulation after it has occured. Clean Seal™ products can be used in combination with other lost circulation materials to control partial to severe losses and to increase wellbore stability.
Clean Seal™ products provide a broad PSD for effective remediation of lost circulation.
Clean Seal™ products are over 97% Acid Soluble for ease of cleanup in reservoir formations with typical acid based completion operations.
Pretreat the active system with 2-10 lbs/bbl of Clean Seal™. In the event of more severe loss mix 10-20 lbs/bbl in the slugging pit and pump sweeps every stand to mitigate losses.
In severe cases of whole fluid loss or losses of more than 30 bbls an hour consider mixing in slugging pit 20-50 lbs/bbl Clean Seal™ and sweeping the hole or spotting the pill in the wellbore.
For more severe loss circulation events Clean Seal™ can be used in conjunction with Ven-Fyber Seal™ products, Remedy™ and Quick-Squeeze™ to provide additional sealing effects and enhanced well bore stability.
Clean Seal PDS